oil

What’s New
Five Minute Facts
  • Condition Monitoring

Filtration Prolongs Oil Life, Protects Equipment

Filtering new and used oil prolongs oil life and protects equipment from wear.

Studies have shown that as much as 70% of all premature machine failures can be attributed to contamination. To prevent these failures, it is important to purify the new oil as it comes into the facility and then keep it clean throughout its life. By establishing an ISO code cleanliness goal and maintaining it, you will extend the life of the oil and the equipment.

Five Minute Facts
  • Asset Strategy

What EAM/CMMS Systems are Companies Using?

Asset data management software is crucial for asset-intensive companies, as operations become increasingly digitized. Some of the heavily dependent industries on EAM software include manufacturing, construction, and oil & gas, to name a few. These same industries also constitute a significant portion of HubHead’s customer base.

Webinars
Challenges and Lessons Learned in Asset Management
  • Asset Strategy

Challenges and Lessons Learned in Asset Management

The webinar will highlight examples of the main challenges and lessons learnt in each phase of the major EPC projects from design till operation. This will be in light of ISO 55000 definition for “Asset Man.

Five Minute Facts
  • Precision and Proactive Skills

Keep Your Hydraulic Oil Clean and Dry to Ensure Reliability

One of the best ways to ensure smooth-running hydraulic systems is to use the right hydraulic oil and keep it clean and dry. Hydraulic systems have become more sophisticated in recent years, as speed and pressure have …

Five Minute Facts
  • Condition Monitoring

Magnetic Stick Inspection-From Oil Line to Every Gearbox Daily

Magnetic Stick Inspection - for the oil line to every gearbox daily to make sure that they are not damaging anything.

  • Brian Borg
  • InfraBuild Steel (formerly Liberty Steel)
Case Studies and Stories
  • Asset Strategy

Major Canadian Oil & Gas Company Extends Life of Operations

Major Canadian oil & gas company extends the life of operations with greater efficiency and reduced costs through OnePM. Problem: A leading Canadian oil & gas company had an offshore operation that was spending 50 percent more on maintenance than other company platforms in the same basin.

Two Minute Tips
  • Precision and Proactive Skills

The Drop Point and Lubrication Contamination

Are you familiar with the term "drop point" of a grease? The drop point is the temperature at which the oil and the soap, which are the two main elements in grease...

  • Tom Murphy
  • SDT
Case Studies and Stories
  • Asset Strategy

Major Global Oil & Gas Producer Improves Speed, Quality, and Cost of Maintenance Builds

A super-major oil and gas producer’s capital-project maintenance builds were costing too much and taking too long using a traditional maintenance-build approach, and the resulting maintenance strategies were of poor quality. The company was experiencing continual overspending, missed deadlines, and maintenance strategies that didn’t deliver the performance and reliability the operations team needed from the asset base...

Case Studies and Stories
  • Condition Monitoring
  • Defect Elimination

Duke Energy Takes Advantage of IIoT for Predictive Maintenance Applications

This case study investigates Duke Energy’s quest to replace its monthly, manual data collection practices with daily, remote data collection and monitoring.

  • Alex West
  • IHS Markit
Sponsored Content
Back to top