MCA

What’s New
Two Minute Tips
  • Defect Elimination

Condemning a Motor Using MCA™

Experience has shown that 20 to 40 percent of motor systems tested may have some sort of alarm condition. Just because a motor has exceeded the alarm limits in MCA Basic™ or MCA PRO™ it does not necessarily mean the motor will fail or should be stopped immediately. For over 30 years the dedicated staff at ALL-TEST Pro have gathered data and resources to determine when a motor will most likely fail on the most common 3-phase squirrel cage motors.

Case Studies and Stories
  • Condition Monitoring

Machine Monitoring and How ESA Technology Can Upgrade Your Plant’s Reliability

In many cases, the quality of the power supplied to the motor system may be the cause of a breakdown or failure. The result of poor “power quality” is usually long term and often overlooked as the source or contributor to the problem. Knowing the quality of the incoming power, along with the mechanical and electrical condition of motor and the mechanical condition of the drive are important at all facilities to maintain uptime & save money...

Two Minute Tips
  • Condition Monitoring

Discreet Component Deenergized and Energized Test Equipment

Electrical Signature Analysis (ESA) is an energized test method where voltage and current waveforms are captured while the motor system is running to assess the health of the motor system..

Webinars
  • Condition Monitoring

Integrating Motor Circuit Analysis Into Your Maintenance Program

Studies show that 83% of electrical winding faults are between conductors. Motor circuit analysis (MCA) is a simple 3-minute non-destructive test that exercises..

Sponsored Content
Back to top