Bill Kruger

What’s New
Five Minute Facts
  • Implementation Strategy

The Importance of Predictive Maintenance

As early as the 1960’s, many companies realized that by routinely monitoring the operating condition of rotating equipment it is possible to obtain an advanced warning of operational or other problems that would impact continued efficient operation.

Case Studies and Stories
  • Condition Monitoring

Machine Monitoring and How ESA Technology Can Upgrade Your Plant’s Reliability

In many cases, the quality of the power supplied to the motor system may be the cause of a breakdown or failure. The result of poor “power quality” is usually long term and often overlooked as the source or contributor to the problem. Knowing the quality of the incoming power, along with the mechanical and electrical condition of motor and the mechanical condition of the drive are important at all facilities to maintain uptime & save money...

Case Studies and Stories
  • Condition Monitoring

Rotor Bar Fault Maintenance Issue: Vibration Sensor Alert

A 398 KW MV motor that runs a blower fan in a cement plant was showing strange behavior. The vibration equipment indicated vibration amplitudes that became chronic with the passage of time. The maintenance team not knowing what the issue was...

Two Minute Tips
  • Condition Monitoring

Discreet Component Deenergized and Energized Test Equipment

Electrical Signature Analysis (ESA) is an energized test method where voltage and current waveforms are captured while the motor system is running to assess the health of the motor system..

Webinars
  • Condition Monitoring

Integrating Motor Circuit Analysis Into Your Maintenance Program

Studies show that 83% of electrical winding faults are between conductors. Motor circuit analysis (MCA) is a simple 3-minute non-destructive test that exercises..

Sponsored Content
Back to top