10 Minute Talk

What’s New
10 Minute Talk
  • Continuous Improvement

Utilizing the Fault Tree (Causal Tree) Technique as Part of the Root Cause Analysis

In this very brief presentation, the fault tree analysis technique, also known as causal tree, will be described as a tool that can be used to determine the root cause of the problem or failure.

10 Minute Talk
  • Condition Monitoring

Implementation of Best Practices in Condition Monitoring

Rolling stand vibration analysis - Issues with data collection Mill stands have had manual vibration data collection conducted monthly since 2010 and although this method was beneficial in finding issues such as alignments, looseness, bearing and gear wear We were still having delay events caused by faster-moving defects in between manual readings.

  • Brian Borg
  • InfraBuild Steel (formerly Liberty Steel)
10 Minute Talk
what is reliability centered maintenance
  • Asset Strategy

A brief introduction to Reliability Centered Maintenance RCM

Reliability Centered Maintenance is a key process used to develop the asset strategy. In this overview presentation, the key elements of RCM will be explained, which a brief explanation of the seven steps.

10 Minute Talk
  • Implementation Strategy

Most Popular IIoT Protocol and Standards

Most Popular IIoT Protocol and Standards - MQTT (message queue telemetry transport to application and middleware on top of TCP/IP for authorization security. DDS (Data Distribution Service) is an IoT standard machine to machine communication. AMQP (Advanced Message Queuing Protocol) application layer for a middleware environment. CoAP (Constrained application protocol)

  • Sven Fleischer
  • Easy-Laser
10 Minute Talk
  • Condition Monitoring

Four Electrical Failure Modes

Electrical failure modes can be divided into four main categories. This tip will briefly discuss these categories and their associated thermal patterns to help the field thermographer better understand and identify thermal anomalies found in the field...

10 Minute Talk
How to Apply Machine Learning at the Process Level by Robert Kalwarowsky of Rob's Reliability Project
  • Data Analytics & IIoT

How to Apply Machine Learning at the Process Level

If a plant wants to start applying machine learning at the process level, they first need a good understanding of their process. They need a good business case…

10 Minute Talk
  • Data Analytics & IIoT

A Brief Introduction to Asset Criticality Ranking

The asset criticality ranking reveals which assets pose the greatest risk to your organization. In this brief introduction, will explain how useful it is to use asset criticality ranking to prioritize your activities and explain, in brief, how to develop the ranking.

10 Minute Talk
  • Continuous Improvement

Back to Basics: Collaboration Is the New Innovation

With Industry 4.0, there is a lot of innovation occurring, but if you focus on the basics of collaboration between professionals and break down the barriers between generations, you will see value created at an exponential rate…

10 Minute Talk
  • Implementation Strategy

Prioritizing Your Activities

Most organizations endeavoring to improve reliability have limited resources and must, therefore, make important decisions about where to focus their efforts, otherwise, they will struggle to make progress. In this brief presentation, we will explain how to use a combination of the asset criticality ranking, Pareto analysis (a bad actor list) and asset health to prioritize activities.

Back to top